Hiển thị các bài đăng có nhãn Hand Made. Hiển thị tất cả bài đăng
Hiển thị các bài đăng có nhãn Hand Made. Hiển thị tất cả bài đăng

Thứ Sáu, 22 tháng 2, 2013

No sew Oil cloth curtains

curtain to cover open shelves

I first made oilcloth curtains for our kitchen french doors as we wanted to conserve energy and give ourselves some privacy. I also wanted them to be wipe clean so oilcloth seemed the perfect option. I made one in a stone/white spot but I didn't want to stitch the curtains as I thought they would look neater and slicker if there was no visible stitching. So I used iron on no sew tape. When it came to covering up the open shelves in our hallway room I opted for oil cloth curtains again, this time in a floral spot print. I thought I could get away with just one but in the end I decided two would give better coverage and look neater. It also gave me the perfect oppurtunity to show you how I did it...

Oil cloth curtains
Tools and materials
  • Oil cloth ( I used English rose taupe)
  • HeatnBond Ultra Tape Roll Fusible tape acts as an adhesive between two pieces of fabric, and it is activated with heat.
    *Make sure you buy a strong hold tape with a backing paper.
  • Silver eyelets


Start by measuring the window/door/cupboard for the desired width and length of the curtains. For the finished curtain width, measure from one end of the curtain track to the other. The overall fabric width will be the final curtain width multiplied by 2. Add 17cm plus to the curtain length to allow for hemming. (11cm for the top hem, 6cm for the bottom hem)
Cut out the fabric.

Oil cloth curtains, How-to step by step
No sew oilcloth curtains steps 1-4
Place material wrong side up and using an iron on low heat bond the tape to the outside edge along the length of the curtains.(until you are sure the tape has melted)
Carefully peel off the backing tape.
Fold hem over and press with your fingers.



Using an an iron on low heat with a clean tea towel between your oilcloth and the iron, bond the hem down along the length of the curtain.(until you are sure the tape has melted)
*Be careful not to move the fabric around too much until the adhesive is dry and secure.
For the top of the curtain iron on a piece of tape along the top edge and another row just below where the 11cm fold will be.
Remove backing tape and add a strip to the outside edge of both sides of the top hem as photo above.
Remove backing tape.
Using an an iron on low heat with a clean tea towel between your oilcloth and the iron, bond the hem down along the top of the curtain.(until you are sure the tape has melted)
Repeat as above to make the 6cm deep bottom hem.

Oilcloth curtains

No sew oilcloth curtains steps 9-12
Now you are ready to create the holes that will house your eyelets.
Each curtain has an even number of eyelets regularly spaced across the width. The spaces between the edges of the first/last eyelet and the edge of the curtain are half of that of subsequent eyelets.
On the top of your curtain, measure 4.5 cm down from the top of the border and draw a small dot with your pen to mark the position of the eyelets.
Most eyelets come closed with a small hole at the top, which you can prize open with a pair of scissors. One half of the eyelet has prongs on the inside and the other has a ridge.
Place the ridged half of your eyelet on top of your border so that the dot is right in the centre.
Draw around the inside of your eyelets.
Make a small fold in the fabric so that you can make your first snip and then cut around the circles.

No sew oilcloth curtains steps 13-16
Place the larger, ridged half of the eyelet underneath your new hole and snap the smaller, pronged half on top. Repeat this till all your eyelets are in place.
Your brand new curtains are now complete and ready to be hung.

Downstairs hallway room

Have a sweet day!

Thứ Tư, 31 tháng 10, 2012

Candy Corn

Candy corn

Happy Halloween! I have been knee deep in DIY this week so only managed to squeeze in one Halloween treat...

When I lived in New York I discovered candy corn and loved it! It can be bought in the UK but only from stores that specialize in American candy. So this year I decided to make my own in colours to match my Halloween theme of pink, black & white. As well as the traditional triangle shape I also made a few pumpkins, bones, skulls and roses.

Candy Corn (makes about 80 pieces)

Ingredients
280g icing sugar ( confectioners sugar)
225g caster sugar
20g (1/4 cup) dry powdered milk
1/4 teaspoon salt
242g (3/4 cup) glucose syrup or golden syrup (corn syrup)
76g (1/3 cup ) unsalted butter
1 teaspoon vanilla essence
Hot pink food colouring
Black food colouring

Cooking instructions
  1. Place icing sugar, powdered milk and salt in a separate bowl and set to one side.
  2. Place caster sugar, syrup and butter into a heavy based saucepan and bring to boil over high heat continually stirring.
  3. Reduce heat to medium and cook for a further 5 mins.
  4. Remove from heat and stir in vanilla essence.
  5. Add powdered milk mixture to saucepan and stir till combined. Leave till mixture is warm to the touch
  6. Separate mixture into three bowls
  7. Add pink food colouring to one portion of dough and knead till colour is even.
  8. Add black food colouring to one portion of dough and knead till colour is even.
  9. Roll each piece into a thin rope.
  10. Push the three ropes together to create a long rectangle.
  11. Gently press them together with a rolling pin.
  12. Cut into small triangle pieces and in your fingers roll into desired shape.
  13. Leave to dry for one hour on sheets of baking paper.
  14. Store in an airtight container, in layers separated with baking paper.

Candy corn skull
To make the tiny roses I used my rose mould from Nabby

Happy Halloween!

Thứ Năm, 28 tháng 6, 2012

Washing machine stickers

Washing machine stickers by Torie Jayne



I loved the washing machine on House to Home that had been given a feminine touch with colourful flower stickers, so I decided to make my own using vinyl sticky back plastic and my favourite butterfly punch. Now even my washing machine is cute!

Washing machine stickers
Tools and materials

Washing machine stickers, How-to step by step
Hand-made vinyl stickers

Simply punch a butterfly out of the polka dot film, peel off backing and stick to washing machine.

They have been stuck on my washing machine for over a month now and they still look as good as new, I will let you know if they start to peel off or look tatty.


Hand-made washing machine stickers


Have a sweet day!

Thứ Tư, 30 tháng 5, 2012

Fabric softener labels

Home-made fabric softener labels

If you are a regular reader of my blog you will know I like designing and making labels for my jars, bottles etc. around my home. My laundry room is no exception. This time I wanted to try something different and decided to design and make decals for my up-cycled drinks bottles. This way they would not get damaged if they got wet and I could also include the recipe and instructions on making my own fabric softener and adhere it to the back of the bottle. I love how they turned out... with one exception! I spelled softener wrongly on my labels, but I have adjusted that fatal error on the labels you can print out for yourself below. The next step is to start making my own fabric softener which will hopefully save me money...


Home-made fabric softener labels

Fabric softener labels
Tools and materials
  • Ink jet water-slide decal paper in clear
  • Clear varnish spray
  • Empty drinks bottle
  • Scissors
  • Lint free cloth
  • Bowl of water

Fabric softener labels, How-to step by step
Making home-made fabric softener labels

Making home-made fabric softener labels

Start by washing and removing labels from drink bottle and leave to dry. Print labels onto a regular sheet of paper so you can check the labels for size and colour. Once you are happy with the size and colour of the labels, print them on to the glossy coated side of the paper. In a well ventilated area, and with newspaper laid on the ground to protect the surface, coat the printed labels with an even coat of clear varnish. Leave to dry for about 30mins. Next carefully cut out the labels. Place cut-out labels into a bowl of water and leave for up to 30 seconds. Before placing the decals onto the bottles, wet the surface of the bottles so you can slide the decals into position easily. Remove label from water and place it facing up on your bottle. Carefully slide the decal paper slightly and attach the corner lip of the decal onto the bottle. Once you have the lip attached to the bottle, gently pull the backing paper away and adhere label to bottle. Once the decal is attached to the bottle, carefully slide it around to your desired position. Then gently rub the label with a lint free cloth to remove any air bubbles and leave to dry for 3-4 hours.

Tips: Use clear varnish spray in a well-ventilated area and protect your work surface from overspray with a newspaper. To start the paint flow properly make sure you have shaken the paint enough (refer to directions on can) and spray first on to newspaper. Spray varnish 30cm away from labels and spray in a sweeping motion maintaining a constant distance from the printed labels. Ensure labels are fully coated in varnish or there will be a leakage of ink when placed in the bowl of water at the later stage.


Fill bottle with home-made fabric softener

Fabric Softener bottles

Pretty Laundry supplies

Have a sweet day!

Thứ Tư, 23 tháng 5, 2012

Bird thumbtacks

Pretty thumbtacks by Torie Jayne

I loved how my pretty thumbtacks turned out so decided to make some bird ones for my new cloakroom pinboard: both practical and pretty!

Bird thumbtacks
Tools and materials

Bird thumbtacks, How-to step by step
Bird pins
Simply glue the thumbtacks to the cabochons and leave to dry.

Have a sweet day!

Thứ Bảy, 19 tháng 5, 2012

My pretty pinboard

Pretty pinboard

This week I have been sharing with you how my cloakroom/laundry room is looking so far. From Monday I will be sharing with you how the room between the dining room and cloakroom/laundry room looks with before and after pics. Before I do I wanted to share with you how I made use of a dark little window that looked into the kitchen but brought no real extra light in as I am using it as a book shelf in the kitchen, as it has a really deep ledge on the kitchen side! I decided to make it into a pinboard, here's how...

Pretty pinboard
Tools and materials

Pretty pinboard, How-to step by step
Window before


Cork tiles


Cloakroom during


Covered pinboard


Pinboard stationery


Pencil


Hand-made pinboard & bird hooks

Have a sweet day!

Thứ Ba, 3 tháng 4, 2012

Bunny jars for Easter

Bunny jars for Easter by Torie Jayne

As soon as I saw the animal storage jars on House to Home I knew I had to make them, but when and what for?!? So when I saw a similar idea on the German site, Living at Home but this time with bunnies on top as an Easter packaging idea, I knew this is what I could make them for. I set about finding some cute plastic bunnies and spray paint in my Easter colours. It took me longer to find the right colour spray paints but I was delighted to discover that Fred Aldous sells a really large array of coloured spray paints from Montana and that Montana White is glossy whilst Montana Black is matte. I so loved spraying the jars that I ended up spraying my metal windmills that were looking a bit worse for wear having sat in the garden for a few years. I think I might have a new addiction, so stay tuned for more of my adventures in spray painting... who knows what!?!

Bunny jars for Easter
Tools and Materials

Bunny jars for Easter, How-to step by step
Making bunny jars


Start by carefully gluing the rabbit to the jar lid and leave to dry. Place lid on a platform you don't need (I used an old glass pot I did not need anymore). Following the instructions on the spray paint, carefully spray the glued rabbit and lid until you have an even coat of paint and the original colour of both the rabbit and lid are no longer visible. Leave to dry. Fill with Easter treats.

Bunny jars
Bunny jars to fill for Easter
Aqua bunny jars
Bunny jar filled with eggs


Have a sweet day!